CHIPNOBO

Semiconductor Replacement Engineering & Supply Continuity

About Instrumentation, OP Amps, Buffer Amps

PRODUCT DATASHEET

ChipNobo MPN

NB411CD

GLOBAL BRAND CROSS-REFERENCE

onsemi

IC OPAMP JFET 1 CIRCUIT 8SOIC

LF411CD

  • High-reliability design
  • Long-term stable supply
  • RoHS compliant
IC OPAMP JFET 1 CIRCUIT 8SOIC

1. PRODUCT POSITIONING

NB411CD is a product identity corresponding to the reference product LF411CD. This document presents the available product specifications, mechanical/package information and compatibility summary for engineering and procurement reference.

This document is a product information. Compatibility conclusions should be read together with the applicable Cross-Reference Identification (CID) rule, package/pin verification and engineering review record.

2. TECHNICAL SPECIFICATION COMPARISON (core parameters)
Parameter onsemi LF411CD ChipNobo NB411CD Match
Part Status Active Active ✓
Voltage - Supply Span (Max) 36 V 36 V ✓
Mounting Type Surface Mount Surface Mount ✓
Package / Case 8-SOIC (0.154", 3.90mm Width) 8-SOIC (0.154", 3.90mm Width) ✓
Operating Temperature 0°C ~ 70°C 0°C ~ 70°C ✓
Number of Circuits 1 1 ✓
Current - Supply 2mA 2mA ✓
Supplier Device Package 8-SOIC 8-SOIC ✓
Amplifier Type J-FET J-FET ✓
Slew Rate 13V/µs 13V/µs ✓
Current - Input Bias 50 pA 50 pA ✓
Voltage - Input Offset 800 µV 800 µV ✓
Voltage - Supply Span (Min) 7 V 7 V ✓
Gain Bandwidth Product 3 MHz 3 MHz ✓
RoHS Status RoHS non-compliant RoHS non-compliant ✓
3. SUPPLY & LIFECYCLE
ChipNobo Number NB411CD
Lifecycle status Active
NRND No
EOL No
PCN monitor No
Last buy date No Deadline
Alternate availability Sufficient

CHIPNOBO

Semiconductor Replacement Engineering & Supply Continuity

About Instrumentation, OP Amps, Buffer Amps

PRODUCT DATASHEET

4. APPLICATION AREAS
ADAS Camera System Battery Management System (BMS)
Electric Vehicle (EV) AI Server
GPU Server PLC Controller
Industrial Robot Semiconductor Equipment
Medical Monitoring Equipment Medical Imaging Equipment
5G Base Station Laboratory Equipment

5. ENGINEERING & COMMERCIAL NOTES

  • The ChipNobo MPN is the public product identity used by ChipNobo for this replacement reference.
  • The original manufacturer and original MPN are retained as reference identity information.
  • Product PDF data are intended for engineering, procurement and supply-continuity reference.
  • Current price, MOQ, lead time, available supply source and regional availability should be confirmed through RFQ.
  • For customer-specific qualification, PCB footprint approval, reliability requirements or design-in approval, the customer should perform the applicable validation process.

CHIPNOBO REPLACEMENT · Semiconductor Replacement Engineering & Supply Continuity Partner

Document purpose: Product Information / Replacement Reference · Generated from the product data supplied for NB411CD.

Important Notice & Disclaimer

Document ID: 【CN-DATA-NB411CD】 Revision: 1.0 Status: Released

The information provided by ChipNobo is intended solely for engineering evaluation, product selection, procurement, and supply continuity reference purposes. Product specifications, lifecycle status, availability, and other information are subject to change without notice. Customers should always verify relevant information against the latest official documentation published by the respective manufacturers.

Cross-reference and replacement recommendations are provided for engineering reference purposes only. They do not constitute a guarantee of pin-to-pin compatibility, interchangeability, or suitability for any particular application. Customers are responsible for conducting all necessary engineering reviews, testing, and qualification prior to product selection and use.

Manufacturer names, trademarks, and part numbers are referenced solely for product identification purposes. Their use does not imply any affiliation with, endorsement by, or authorization from the respective manufacturers, unless expressly stated otherwise.

To the maximum extent permitted by applicable law, ChipNobo makes no warranties, express or implied, regarding the completeness, accuracy, or suitability of the information provided and shall not be liable for any loss or damage arising from its use or reliance, except as otherwise expressly agreed in writing and subject to applicable law.