NB212A10

GLOBAL BRAND CROSS-REFERENCE

onsemi

TRIAC 800V 12A TO220AB

MAC212A10

High-reliability design
Long-term stable supply
RoHS compliant

TRIAC 800V 12A TO220AB

1. PRODUCT POSITIONING

NB212A10 is a product identity corresponding to the reference product MAC212A10. This document presents the available product specifications, mechanical/package information and compatibility summary for engineering and procurement reference.

This document is a product information. Compatibility conclusions should be read together with the applicable Cross-Reference Identification (CID) rule, package/pin verification and engineering review record.

2. TECHNICAL SPECIFICATION COMPARISON (core parameters)
Parameter	onsemi MAC212A10	ChipNobo NB212A10	Match
Part Status	Active	Active	✓
Mounting Type	Through Hole	Through Hole	✓
Supplier Device Package	TO-220AB	TO-220AB	✓
Package / Case	TO-220-3	TO-220-3	✓
Current - On State (It (RMS)) (Max)	12 A	12 A	✓
Voltage - Gate Trigger (Vgt) (Max)	2 V	2 V	✓
Current - Gate Trigger (Igt) (Max)	50 mA	50 mA	✓
Configuration	Single	Single	✓
Operating Temperature	-40°C ~ 125°C (TJ)	-40°C ~ 125°C (TJ)	✓
Triac Type	Standard	Standard	✓
Current - Hold (Ih) (Max)	50 mA	50 mA	✓
Voltage - Off State	800 V	800 V	✓
Current - Non Rep. Surge 50, 60Hz (Itsm)	100A @ 60Hz	100A @ 60Hz	✓
RoHS Status	RoHS non-compliant	RoHS non-compliant	✓
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	✓

3. SUPPLY & LIFECYCLE
ChipNobo Number	NB212A10
Lifecycle status	Active
NRND	No
EOL	No
PCN monitor	No
Last buy date	No Deadline
Alternate availability	Sufficient

CHIPNOBO

Semiconductor Replacement Engineering & Supply Continuity

TRIACs

PRODUCT DATASHEET

5. ENGINEERING & COMMERCIAL NOTES

The ChipNobo MPN is the public product identity used by ChipNobo for this replacement reference.
The original manufacturer and original MPN are retained as reference identity information.
Product PDF data are intended for engineering, procurement and supply-continuity reference.
Current price, MOQ, lead time, available supply source and regional availability should be confirmed through RFQ.
For customer-specific qualification, PCB footprint approval, reliability requirements or design-in approval, the customer should perform the applicable validation process.

Document purpose: Product Information / Replacement Reference · Generated from the product data supplied for NB212A10.

Important Notice & Disclaimer

Document ID: 【CN-DATA-NB212A10】 Revision: 1.0 Status: Released

The information provided by ChipNobo is intended solely for engineering evaluation, product selection, procurement, and supply continuity reference purposes. Product specifications, lifecycle status, availability, and other information are subject to change without notice. Customers should always verify relevant information against the latest official documentation published by the respective manufacturers.

Cross-reference and replacement recommendations are provided for engineering reference purposes only. They do not constitute a guarantee of pin-to-pin compatibility, interchangeability, or suitability for any particular application. Customers are responsible for conducting all necessary engineering reviews, testing, and qualification prior to product selection and use.

Manufacturer names, trademarks, and part numbers are referenced solely for product identification purposes. Their use does not imply any affiliation with, endorsement by, or authorization from the respective manufacturers, unless expressly stated otherwise.

To the maximum extent permitted by applicable law, ChipNobo makes no warranties, express or implied, regarding the completeness, accuracy, or suitability of the information provided and shall not be liable for any loss or damage arising from its use or reliance, except as otherwise expressly agreed in writing and subject to applicable law.